Working Units - Accuracy

Working Units - Accuracy

This Rule checks the Working Units - Master Unit of a DGN file.

Parameters

1. Precision Format - a dropdown selection (0.1, 0.12, 0.123 etc.)

Explanation & Example

If you want to check that the working units accuracy is set to 3 decimal places (0.123) in a DGN file then add this Rule to your Rule Set with '0.123' as the parameter value.

Parameter Variants

PrecisionFormat.Decimal_Whole => "0",

PrecisionFormat.Decimal_1_Place => "0.1",

PrecisionFormat.Decimal_2_Place => "0.12",

PrecisionFormat.Decimal_3_Place => "0.123",

PrecisionFormat.Decimal_4_Place => "0.1234",

PrecisionFormat.Decimal_5_Place => "0.12345",

PrecisionFormat.Decimal_6_Place => "0.123456",

PrecisionFormat.Decimal_7_Place => "0.1234567",

PrecisionFormat.Decimal_8_Place => "0.12345678",

PrecisionFormat.Fractional_Whole => "1",

PrecisionFormat.Fractional_Half => "1/2",

PrecisionFormat.Fractional_Quarter => "1/4",

PrecisionFormat.Fractional_Eighth => "1/8",

PrecisionFormat.Fractional_Sixteenth => "1/16",

PrecisionFormat.Fractional_1_Over_32 => "1/32",

PrecisionFormat.Fractional_1_Over_64 => "1/64",

PrecisionFormat.Fractional_1_Over_128 => "1/128",

PrecisionFormat.Fractional_1_Over_256 => "1/256",

PrecisionFormat.Scientific_Whole => "0.1E+01",

PrecisionFormat.Scientific_1_Place => "0.12E+01",

PrecisionFormat.Scientific_2_Place => "0.123E+01",

PrecisionFormat.Scientific_3_Place => "0.1234E+01",

PrecisionFormat.Scientific_4_Place => "0.12345E+01",

PrecisionFormat.Scientific_5_Place => "0.123456E+01",

PrecisionFormat.Scientific_6_Place => "0.1234567E+01",

PrecisionFormat.Scientific_7_Place => "0.12345678E+01",

PrecisionFormat.Scientific_8_Place => "0.123456789E+01",

Note

List of All Available Rules